For conditions C5

ARMOPUR® DTM 113 MAT

Two‑component matte acrylic‑polyurethane DTM coating provides durable anticorrosion and weather‑resistant protection of metal surfaces and chassis of commercial vehicles.

acrylic‑polyurethanethick‑coat applicationColor matched to RAL, NCS and sample

ARMOPUR® DTM 113 Gloss

Corrosion‑protective primer‑finish coating, two‑component, glossy, acrylic‑polyurethane, weather‑resistant.

acrylic polyurethaneтолстослойное нанесениеColor‑matched to RAL, NCS, and sample

FAQ

What degree of surface preparation is specified for condition C5?

For corrosion category C5 conditions (very high corrosion activity) according to ISO 12944, the most thorough surface preparation is required, as these conditions involve extreme loads (industrial areas with high humidity and aggressive environments or coastal/marine zones with high salt content). The minimum preparation grade is Sa 2.5 according to ISO 8501.

What is the nominal dry film thickness?

Nominal dry film thickness is the thickness of the dried coating, specified for each layer or the entire coating system.

Can alkyd materials be used for C5 conditions according to ISO 12944?

Considering the aggressiveness of these conditions, the standard does not permit the use of alkyd coatings.