Quick-drying primer MK

ARMEPOX® PRIMER 041 UHS

Two‑component epoxy primer‑finish coating with a non‑volatile solids content of 76 % and zinc phosphate, providing excellent anticorrosion protection. Fast curing, ideal for high‑productivity application in shop environments at temperatures down to −10 °C.

epoxyfast dryinglight gray red‑brown

ARMEPOX® DTM 242 UHS

Two‑component epoxy anticorrosion colorable coating DTM with a volume fraction of non‑volatile substances of 70 %.

epoxyfast drying

ARMALKYD® PRIMER 021

Fast‑drying single‑component alkyd‑modified primer.

alkyd modifiedquick dryinglight gray white beige colored (limited)

FAQ

What is the minimum air temperature at which Armepox 041 UHS can be used?

The minimum ambient air temperature at the time of application and curing of ARMEPOX 041 UHS must be at least -10 °C. The surface temperature must be 3 degrees above the dew point. The temperature of the material itself must be at least +15 °C.

What equipment is recommended for applying ARMEPOX 041 UHS?

ARMEPOX 041 UHS is a high‑solids epoxy primer with relatively high viscosity, therefore airless spraying (BVR) is recommended. Recommended equipment parameters: flow rate from 6 L/m, nozzle pressure of at least 180 bar. Use of low‑power equipment may require increased solvent addition to reduce viscosity.

What colors are available for the epoxy primer‑enamel ARMEPOX 242 UHS?

The epoxy primer‑enamel ARMEPOX 242 UHS is available in the colors of the RAL K5 CLASSIC catalog and the RAL K7 CLASSIC catalog. Contact us for more detailed information on coloring options.