Lighting posts

ARMEPOX® PRIMER 041

Two‑component epoxy anticorrosion primer‑finish coating for industrial use, ideally suited as a base for two‑component acrylic‑polyurethane enamels for long‑lasting protection.

epoxyfast overcoatlight gray beige

ARMEPOX® DTM 242

Two‑component epoxy anticorrosion colorable coating DTM with a non‑volatile content of 70 %.

epoxyfast drying

ARMOPUR® TOPCOAT 111

Two‑component acrylic‑polyurethane weather‑resistant high‑gloss enamel.

acrylic polyurethanecolored according to RAL, NCS, and sample

FAQ

We manufacture galvanized lighting masts, and customers often request painting over the galvanisation. Do you have primers for galvanized?

Epoxy primer ARMEPOX 041 is used for adhesion‑challenging substrates.

Need a textured finish enamel to conceal minor defects of the substrate (underlay)?

Of course, enamels are not intended to conceal or eliminate substrate defects; they are not putty, they have a thin coating. However, our range includes textured enamels, for example ARMOPUR® DTM 113 TEXTURED. ARMOPUR® TOPCOAT 111 "GRAPHITE" has a striking appearance with a metallic grit effect.

Can polyurethane enamel be applied to a powder coating?

Yes, it can be applied. In certain cases, surface mattification may be required to ensure reliable adhesion.