Switch Language

DTMs Primer-Finishes

  1. Home
  2. Catalog
  3. DTMs Primer-Finishes
Filters
Purpose
Chemical basis
Surface type
Color
Степень блеска
ARMEPOX®

Clone of ARMEPOX® DTM 244 GF

Two‑component epoxy primer‑finish coating with abrasion resistance, reinforced with glass flakes.

epoxyabrasion resistancecolored (limited)
ARMEPOX®

ARMEPOX® DTM 244 GF

Two‑component epoxy primer‑finish coating with abrasion resistance, reinforced with glass flakes.

epoxyabrasion resistancecolored (limited)
ARMEPOX®

ARMEPOX® DTM 243 Mastic ALU

Two‑component epoxy putty with aluminum pigment, forming a protective coating in the color “Aluminum Grey”. It can be applied to partially prepared surfaces and exhibits high tolerance to insufficient surface preparation (remaining rust and old coatings). It is used for repair painting and in conditions where high‑quality surface preparation cannot be ensured. The aluminum pigment enhances the coating’s barrier properties and provides additional protection against moisture and corrosion.

epoxysurface tolerantaluminum gray
ARMOPUR®

ARMOPUR® DTM 113 MAT

Two‑component matte acrylic‑polyurethane DTM coating provides durable anticorrosion and weather‑resistant protection of metal surfaces and chassis of commercial vehicles.

acrylic‑polyurethanethick‑coat applicationColor matched to RAL, NCS and sample
ARMOPUR®

ARMOPUR® DTM 162 Gloss

Two‑component acrylic‑polyurethane anticorrosion primer‑finish coating, weather‑resistant, glossy.

acrylic‑polyurethanehigh‑build applicationColored according to RAL, NCS, and sample.
ARMOPUR®

ARMOPUR® DTM 113 DEEP MATTE ANTISCRATCH

Two-component acrylic‑polyurethane finish with deep matte effect, cured with an aliphatic isocyanate, provides a smooth, scratch‑resistant surface with a gloss of 5–10 %.

acrylic‑polyurethanehigh scratch resistanceColored according to RAL, NCS and sample
ARMEPOX®

ARMEPOX® DTM 242 UHS

Two‑component epoxy anticorrosion colorable coating DTM with a volume fraction of non‑volatile substances of 70 %.

epoxyfast drying
ARMEPOX®

ARMEPOX® DTM 242

Two‑component epoxy anticorrosion colorable coating DTM with a non‑volatile content of 70 %.

epoxyfast drying
ARMALKYD®

ARMALKYD® DTM 123 MATTE

One-component alkyd-modified anticorrosion weather‑resistant primer‑finish coating.

modified alkydfast dryingColour‑matched to RAL, NCS, and sample.
ARMOPUR®

ARMOPUR® DTM 113 Gloss

Corrosion‑protective primer‑finish coating, two‑component, glossy, acrylic‑polyurethane, weather‑resistant.

acrylic polyurethaneтолстослойное нанесениеColor‑matched to RAL, NCS, and sample
ARMOPUR®

ARMOPUR® DTM 113 SEMIGLOSS

Corrosion‑resistant primer‑finish coating, two‑component, semi‑gloss acrylic‑polyurethane, weather‑resistant.

acrylic‑polyurethanethick‑coat applicationColored according to RAL, NCS and sample
ARMALKYD®

ARMALKYD® DTM 123 Semi‑gloss

Fast-drying single-component alkyd semi-gloss primer‑finish coating with anti-corrosion and weather-resistant properties for reliable metal protection.

alkyd‑modifiedColor‑matched to RAL, NCS and sample
ARMOPUR®

ARMOPUR® DTM 113 TEXTURED

Two-component acrylic‑polyurethane anticorrosion primer‑finish coating, weather‑resistant with a textured effect.

acrylic‑polyurethanetextured special effectColored according to RAL, NCS, and the sample.
ARMEPOX®

ARMEPOX® DTM 243 Mastic

Two‑component epoxy putty that permits painting on incompletely prepared surfaces. It is used for repair painting and in conditions where high‑quality surface preparation cannot be ensured.

epoxysurface tolerantlight gray red‑brown
ARMEPOX®

ARMEPOX® DTM 249

Epoxy‑phenolic chemical‑resistant coating, ideally suited for tanks, pipelines and equipment that contacts fuel and industrial chemicals.

phenol‑epoxyhigh chemical resistancelight gray
ARMEPOX®

ARMEPOX® DTM 243 MIO

Epoxy barrier coating reinforced with iron slag (MIO). Provides reliable protection of metal surfaces as an intermediate barrier layer in multilayer systems.

epoxybarrier propertiesgray
Total 1 - 16 из 16

FAQ

Primer‑finish coating is a universal coating that combines the functions of a primer and enamel. In industrial and anticorrosion applications, the primer‑finish coating contains an active anticorrosion pigment and a special composition of fillers that provide additional barrier protection, while retaining all the advantages of a universal coating: reliable adhesion, surface leveling, and decorative effect. Unlike ordinary enamels, which are intended solely for a final decorative coating, the primer‑finish coating performs both decorative and protective functions simultaneously, reducing the number of layers, operations, and painting time. This solution simplifies and speeds up the technological process and provides application versatility, combining anticorrosion protection with an aesthetic effect, making it convenient for use in anticorrosion protection and transport engineering.

Answer. Acrylic‑polyurethane primer‑finish coatings have high light fastness, excellent adhesion to metal, and the ability to adjust gloss—from matte to glossy. They dry quickly and are resistant to atmospheric influences, making them ideal for exterior painting of transport, railway cars, buses, construction machinery, equipment and metal structures. 

Answer. Epoxy primer‑finish coatings exhibit high corrosion resistance, excellent adhesion to steel and aluminum surfaces, and chemical resistance to many aggressive media. They form a dense barrier layer that protects the metal from moisture and aggressive substances. Epoxy primer‑finish coatings are used for internal and external metal structures, tanks, pipelines, as well as for installations with elevated humidity or periodic contact with chemical reagents.

Answer. Epoxy‑phenolic‑alkyd primer‑finish coatings are specialized coatings with enhanced chemical resistance, designed for use in aggressive environments (acids, bases, solvents, industrial chemicals). They provide long‑term protection of metal and reinforced‑concrete structures in the chemical industry, storage tanks for aggressive substances, pipelines, and process equipment. These primer‑finish coatings form a durable, dense film with excellent adhesion and resistance to erosion and corrosion.

Answer. When selecting a primer‑finish coating, the following factors are considered: surface type (steel, aluminum, galvanized coating), service conditions (outdoor or indoor work, humidity, chemical exposure), required lightfastness, gloss and decorative properties, and application method. For transport and exterior objects, acrylic‑urethane primer‑finish coatings are suitable, for interior anti‑corrosion and barrier systems – epoxy, and for chemically aggressive environments – epoxy‑phenol‑wax chemical‑resistant primer‑finish coatings. Proper selection guarantees coating durability and minimal maintenance costs.