Switch Language

Buildings | Hangars Inside

  1. Home
  2. Catalog
  3. Buildings | Hangars Inside
Chemical basis
Surface type
Color
Степень блеска
Anti‑corrosion coatings
Bridges
Cold galvanization
Show all  
ARMEPOX®

ARMEPOX® PRIMER 041 UHS

Two‑component epoxy primer‑finish coating with a non‑volatile solids content of 76 % and zinc phosphate, providing excellent anticorrosion protection. Fast curing, ideal for high‑productivity application in shop environments at temperatures down to −10 °C.

epoxyfast dryinglight gray red‑brown
ARMALKYD®

ARMALKYD® TOPCOAT 121

Single‑component alkyd‑acrylic weather‑resistant glossy enamel.

modified alkydfast dryingcolored according to RAL, NCS and sample
ARMEPOX®

ARMEPOX® DTM 242 UHS

Two‑component epoxy anticorrosion colorable coating DTM with a volume fraction of non‑volatile substances of 70 %.

epoxyfast drying
ARMEPOX®

ARMEPOX® DTM 242

Two‑component epoxy anticorrosion colorable coating DTM with a non‑volatile content of 70 %.

epoxyfast drying
ARMALKYD®

ARMALKYD® DTM 123 MATTE

One-component alkyd-modified anticorrosion weather‑resistant primer‑finish coating.

modified alkydfast dryingColour‑matched to RAL, NCS, and sample.
Total 1 - 5 из 5

FAQ

If no corrosion traces are visible on the metal, a polyurethane primer‑finish coating ARMOPUR® DTM 162 can be applied directly to the existing coating. The material contains zinc phosphate, is flexible, which is especially important for thin‑sheet cladding, and offers high resistance to fading and long‑term color retention. If corrosion traces are present, after removal the surface should be primed with ARMEPOX 041 and a finish layer of polyurethane enamel applied.