Two‑component epoxy primer‑finish coating with abrasion resistance, reinforced with glass flakes.
Two‑component epoxy primer‑finish coating with abrasion resistance, reinforced with glass flakes.
Two‑component epoxy putty with aluminum pigment, forming a protective coating in the color “Aluminum Grey”. It can be applied to partially prepared surfaces and exhibits high tolerance to insufficient surface preparation (remaining rust and old coatings). It is used for repair painting and in conditions where high‑quality surface preparation cannot be ensured. The aluminum pigment enhances the coating’s barrier properties and provides additional protection against moisture and corrosion.
Two‑component matte acrylic‑polyurethane DTM coating provides durable anticorrosion and weather‑resistant protection of metal surfaces and chassis of commercial vehicles.
Two‑component acrylic‑polyurethane anticorrosion primer‑finish coating, weather‑resistant, glossy.
Two-component acrylic‑polyurethane finish with deep matte effect, cured with an aliphatic isocyanate, provides a smooth, scratch‑resistant surface with a gloss of 5–10 %.
Two‑component epoxy anticorrosion primer‑finish coating for industrial use, ideally suited as a base for two‑component acrylic‑polyurethane enamels for long‑lasting protection.
Two‑component epoxy primer‑finish coating with a non‑volatile solids content of 76 % and zinc phosphate, providing excellent anticorrosion protection. Fast curing, ideal for high‑productivity application in shop environments at temperatures down to −10 °C.
Two‑component epoxy anticorrosion colorable coating DTM with a volume fraction of non‑volatile substances of 70 %.
Two‑component epoxy anticorrosion colorable coating DTM with a non‑volatile content of 70 %.
One-component alkyd-modified anticorrosion weather‑resistant primer‑finish coating.
Fast‑drying single‑component alkyd‑modified primer.
Corrosion‑protective primer‑finish coating, two‑component, glossy, acrylic‑polyurethane, weather‑resistant.
Corrosion‑resistant primer‑finish coating, two‑component, semi‑gloss acrylic‑polyurethane, weather‑resistant.
Fast-drying single-component alkyd semi-gloss primer‑finish coating with anti-corrosion and weather-resistant properties for reliable metal protection.
Adhesion primer for plastics and low-wettable surfaces, provides excellent adhesion of enamel finish layers to polyethylene (PE), polypropylene (PP), glass and existing paint coating.
Two‑component epoxy putty that permits painting on incompletely prepared surfaces. It is used for repair painting and in conditions where high‑quality surface preparation cannot be ensured.
Epoxy‑phenolic chemical‑resistant coating, ideally suited for tanks, pipelines and equipment that contacts fuel and industrial chemicals.
Two‑component acrylic‑polyurethane anticorrosion primer with high adhesion to steel and non‑ferrous metals, ideally suited for ultra‑fast wet‑on‑wet overcoating with two‑component finish enamels.
Two-component epoxy primer‑finish coating with high zinc content (≥80 %), providing cathodic protection of steel as the first layer in three‑layer anticorrosion systems.