Two‑component epoxy primer‑finish coating with abrasion resistance, reinforced with glass flakes.
Two‑component epoxy primer‑finish coating with abrasion resistance, reinforced with glass flakes.
Two‑component epoxy putty with aluminum pigment, forming a protective coating in the color “Aluminum Grey”. It can be applied to partially prepared surfaces and exhibits high tolerance to insufficient surface preparation (remaining rust and old coatings). It is used for repair painting and in conditions where high‑quality surface preparation cannot be ensured. The aluminum pigment enhances the coating’s barrier properties and provides additional protection against moisture and corrosion.
Two-component acrylic‑polyurethane weather‑resistant enamel with a decorative “graphite” effect. It creates a rough metallic finish resembling fine‑grit sandpaper, with iridescent shifts and relief that accentuates the shape of forged and decorative elements.
Acrylic‑polyurethane clear high‑gloss lacquer for weather‑resistant coatings over base layers in repair painting of automobiles, and in painting truck cabins, buses, and trams.
Acrylic‑polyurethane clear high‑gloss coating for weather‑resistant decorative finishes on commercial vehicles over base layers.
Two‑component acrylic‑polyurethane high‑gloss light‑fast enamel for coating equipment and metal structures with a bright decorative effect.
Two‑component epoxy anticorrosion colorable coating DTM with a volume fraction of non‑volatile substances of 70 %.
Two‑component semi‑gloss acrylic‑polyurethane enamel. Also used as a 2K base paint for subsequent coating with acrylic lacquers.
Two‑component acrylic‑polyurethane weather‑resistant high‑gloss enamel.
Two‑component acrylic‑polyurethane high‑gloss lightfast enamel for coating equipment and metal structures with a bright decorative effect.
Corrosion‑resistant primer‑finish coating, two‑component, semi‑gloss acrylic‑polyurethane, weather‑resistant.
Fast-drying single-component alkyd semi-gloss primer‑finish coating with anti-corrosion and weather-resistant properties for reliable metal protection.
Two‑component epoxy putty that permits painting on incompletely prepared surfaces. It is used for repair painting and in conditions where high‑quality surface preparation cannot be ensured.
Epoxy‑phenolic chemical‑resistant coating, ideally suited for tanks, pipelines and equipment that contacts fuel and industrial chemicals.